Numerical modelling of pile jacking in highly sensitive clays

Abstract

This paper presents large deformation finite element (FE) modelling of penetration of solid cylindrical piles into highly sensitive soft clay. The simulations are performed using a Coupled Eulerian-Lagrangian (CEL) FE modeling technique. The pile is penetrated at a constant rate, and the analyses are performed for undrained conditions to simulate the response during penetration. The soil model considers the effects of strain softening and strain rate on the undrained shear strength. The FE calculated results are compared with available analytical and numerical solutions for idealized soil profiles. Simulations are also performed for two instrumented piles previously installed into highly sensitive clay at Saint-Alban in Québec, Canada. The installation-induced changes in stresses, degradation of undrained shear strength, and tip resistance obtained from FE analyses are consistent with the field test results. Large plastic shear strains develop near the pile, which can significantly remould the soil near the pile shaft. A parametric study shows that a quicker post-peak degradation of undrained shear strength of highly sensitive clay creates a smaller zone of high plastic shear strain near the pile, while the plastic zone is wider for low- to non-sensitive clays.